Remote Slave Cylinder Bleeder
Viewed: 132 times.
|
A mess of parts
Viewed: 151 times.
|
Cross member lowering blocks
Viewed: 132 times.
|
Rather than remove the intake I made a fitting that alows for 2 oil pressure senders. One will be for the OE gauge and one for a aftermarket
Viewed: 131 times.
|
Close up of the Coil Relocation Bracket
Viewed: 131 times.
|
Here is #7 coil mounted on the relocation bracket
Viewed: 152 times.
|
RH Pilot Bearing and Bushing
Viewed: 130 times.
|
Nice Looking . . . hope they last
Viewed: 124 times.
|
Very Nice looking piece . . . no instructions though
Viewed: 118 times.
|
While I had the pan off ARP pro rod bolts replaced the OE ones
Viewed: 103 times.
|
OilPan
Viewed: 132 times.
|
OilPan2
Viewed: 139 times.
|
Vibration absorbing material.
Viewed: 137 times.
|
Made a quick mounting bracket
Viewed: 126 times.
|
Here is the oil filter/sandwich plate w/plumbing
Viewed: 129 times.
|
Here is my solution for a car with no heater.
Viewed: 152 times.
|
Disconnected TB hose and ran new hose
Viewed: 140 times.
|
FuelRail
Viewed: 146 times.
|
Remote Bleeder & Clutch Reservoir Mounted
Viewed: 155 times.
|
My set up. Sensor adjusts with small washers. The sensor is from a 1999-2002 Automatic Camaro Part #2131701 or 24225896.
Viewed: 185 times.
|
